SucceX 50A 2-6S 4-in-1 ESC

Sold Out

A high quality 30 x 30 full size BLHeli 32 ESC board with a good value to price performance, this ESC can handle input voltage of up to 6S and incorporate  quality TDK MLCC low ESR capacitors and NTMFS5C430NL MOSFETs for good flight performance and response. Features: - 8 layers double-sided PCB board; - 4oz 1.6mm thick power board(0.9mm copper ratio),better...

Add to cart

Jumper T16 Internal Multi-Protocol Radio Module Upgrade

Sold Out

Kit to convert Jumper transmitters (T16 and T16 Plus) with external radio modules to internal based radio module as in the Jumper T16 Pro transmitter. The conversion leaves the external JR bay free for use with modules such as CRSF  Click link here for installation guide

Add to cart

Jumper T16 Gimbal Stick-ends Upgrade (M3 thread)

Sold Out

Upgraded accessory suitable for Jumper T16, T16 Plus, T16 Pro, T16 Pro Hall.  Package Includes: 2 pcs x Gimbal Stick-ends (M3 thread)

Add to cart

Jumper T16 Pro V2 (Hall Sensor Gimbals)

Sold Out

The Jumper T16 Pro V2 now comes with an external battery charging port utilizing USB Type C and folding handle for increased convenience along with the same amazing features of the Pro V1; such as full colour screen, new hall sensor gimbals, internal multi-protocol radio module and external JR module bay for use with an external TBS Crossfire module. Jumper T16 is...

Add to cart

Foxeer Razer Micro FPV Camera - 1.8mm IR Blocked

Sold Out

The Razer is an all new micro FPV camera from Foxeer with 1200TVL, low latency and good low light performance 1200TVL definition with advanced natural image. Advanced quality 1.8mm M8 lens. 4:3/16:9 optional, PAL/NTSC switchable. Supports 4.5~25V input voltage. Specifications: Sensor Type CMOS 1/3 Scale 4:3 / 16: 9 Optional TV System PAL/ NTSC Switchable Resolution 1200TVL FOV 4:3 FOV-H...

Add to cart

High-Grip Reusable Battery Pad

SGD$1.00

These battery pads provide excellent grip between the battery pack and frame, prevent slippage of LiPo battery mid-flight. To keep the pad contact surface tacky, rinse with water or wipe with a wet cloth. Specifications : Material PU based Gel Colour Clear Size 50mm x 50mm x thickness 3mm  Note use scissors to cut to size before peeling the clear protective...

Add to cart

Jumper R1D16 Receiver

SGD$20.30

The Jumper R1D16 receiver is compatible with all devices capable of using FrSky D16 mode. Specifications: Dimension 20*15*4mm (without antenna) Weight <2g Number of channels 16ch (SBUS) RSSI (Signal Strength Indication) output 0-3.3v Data return S.port Operating Voltage Range 4.0~6V Operating Current Range 80mA@5V Effective distance full distance (>1.5km) Compatibility FrSky D16 Mode   Binding method:Press and hold the receiver's...

Add to cart

SucceX 60A V2 Plus BLHeli_32 4 in 1 ESC

Sold Out

iFlight SucceX 60A V2 Plus BLHeli_32 4 in 1 ESC is designed to give motors smooth power with great stability and durability. The 32bit 48mHz 3-IN 1 STM32F051  MCU, Metal MOSFET, TDK MLCC Low ESR ceramic capacitors provide high efficiency and better heat dissipation. A perfect companion to the SucceX TwinG F7 flight controller Specifications :  MCU STM32F051 Protocol Dshot150/300/600/1200, Oneshot, Multishot...

Add to cart

T-Motor F40 PRO III - 2400KV/2600KV

SGD$38.50

  Continuing the lineage, the F40 Pro III provides more thrust and increased durability compared to its predecessors. Each motor is supplied with high-quality EZO bearings for maximum performance and lifespan. On top of that, the overall stability of the motor has been enhanced with high-temperature resistance enameled silver-core windings which is able to withstand up to 240C. Lastly, the...

Select Options

RunCam Micro Swift 3 V2 – 2.1mm IR Blocked

SGD$45.80

  Specifications: Image Sensor 1/3" SONY Super HAD II CCD Horizontal Resolution 600TVL Lens 2.1mm ​(M8)​ FOV160° Signal System PAL / NTSC Integrated OSD Yes One Touch Scene Setting(AGC) Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight S/N Ratio >60dB (AGC OFF) Electronic Shutter Speed PAL: 1/50~100,000; NTSC: 1/60~100,000 WAuto Gain Control (AGC) Yes Min. Illumination 0.01Lux@1.2F...

Add to cart

RPSMA Male to SMA Female Extension/ Adapter cable

SGD$4.00

  Specifications: Connector RPSMA Male to SMA Female  Cable Straight    

Add to cart

Bonka U2 SI GR 1300mAh 6s 100c Silicone Graphene Lipo Pack

Sold Out

*Not available for overseas shipment A new upgraded version of BONKA FPV performance U2 batteries series, employing the latest Silicone Graphene (SI GR) composition for added consistent explosive power - Ultralight - Higher reliability - Remarkable performance Specifications: Cells   6S  Capacity  1300mAh Discharge 100C (130amp) Nominal Voltage  22.2V Cell Configuration 6S1P Connection  XT60 plug Dimension W50mm x H34mm x L75mm Weight 240g   * For those in the know and seek...

Add to cart

RGB 10 LED 3535 Multi-Colors Race Wire for 4 in 1 ESCs - 4pcs

SGD$17.70

  iFlight's latest race wire for use with 4in1 ESCs motor connection can now be configured via the FC's firmware configuration, allowing multi-colored LED and scheme. Using race wires with 4in1 ESCs reduces the risk of cutting motor wires from prop strikes. It is also great for mounting underarm for lighting up your quad.  Specifications: Current capacity 40amps No. of...

Add to cart

SucceX F7 TwinG Flight Controller V2.1

Sold Out

SucceX F7 TwinG // GYRO FUSION is the NEXT-GEN flight controller, ready for anything, with 5 uarts, 8 motor outputs, 32Mb blackbox and a powerful F7 processor to run it all. With it's clean intuitive layout, the SucceX F7 TwinG makes installation a breeze with a 4-pin connector for your VTx and an 8-pin connector that allows simple plug and...

Add to cart

Motors screw set (20pcs)

SGD$4.70

  Screw set comprising of 20 pieces, 12.9 high strength YFS screw M3 x 6mm (Gold).   Specifications: Type Button head screws Package includes YFS screw M3 x 6mm (G) suitable for 4mm thickness arm    

Add to cart

T-Motor F60 PRO III - 2500KV/2700KV

SGD$39.00

  Continuing the success of their FPV racing motors, F60 Pro III is the latest from T-motor's stable of FPV racing motors promising higher thrust and durability. These new motors feature high temperature resistance (240 deg Celsius) enameled silver winding and titanium alloy motor shaft with stronger thread, riding on high quality EZO bearings. New great looking bell with anti-slip...

Select Options

SucceX Mini 35A 2-6S 4 in 1 ESC V2

Sold Out

Replacement ESC board for SucceX Mini F4 Stack. Specifications :  Type  V2 MCU STM32F051 Protocol Dshot1200, Proshot, Oneshot, Multishot Target iFlight-BL32-4IN1 Input  2-6S LiPo Current sensor Yes Capacity 35A, 45A burst Dimension 31 x 31mm (including the power pads) Mounting holes 20 x 20mm Package includes 1pc x SucceX Mini 35A 2-6S 4 in 1 ESC    Click here for wiring diagram  

Add to cart

TPU Battery Protector / Landing Gear

SGD$5.70

  Light weight TPU 3D printed designed for racing frames with bottom mounted batteries, it protects the battery from ground hits when in low level flights or when landing.   Specifications : Material 3D printed TPU Colour Yellow, Red Front Incline Angle 30 degrees Fit Type 1 - Red (200 - 250mm frame) Type 2 - Yellow (110 - 130mm frame)...

Select Options

iFlight XING X2306 2450/2750KV FPV NextGen Motor

SGD$29.10

 iFlight XING series motors, designed by FPV pilot and specialist Patrick Xing; combining iFlight's high-quality motor production technology with Patrick Xing's technical expertise to produce a top-of-the-line motor. The elliptical body, powerful stator with high temperature resistant windings, N52H magnets, very small air gap and dynamically balanced bell; result in a motor that delivers incredibly smooth power and thrust. These amazing looking XING...

Select Options

iFlight XING X2207 2450KV/ 2750KV FPV NextGen Motor

SGD$29.10

 iFlight XING series motors, designed by FPV pilot and specialist Patrick Xing; combining iFlight's high-quality motor production technology with Patrick Xing's technical expertise to produce a top-of-the-line motor. The elliptical body, powerful stator with high temperature resistant windings, N52H magnets, very small air gap and dynamically balanced bell; result in a motor that delivers incredibly smooth power and thrust. These amazing looking XING motors...

Select Options

Airbot Furling32 MINI 45A– F3 BLHELI 32 ESC

SGD$27.00

  A powerful ESC in a small package, the Furling32 Mini is the latest ESC from Airbot and employs a full F3 onboard MCU operating at 108Mhz compared to most other Blheli32 ESCs running F0 MCU at 48Mhz. This latest F3 ESC gives a smooth control and fast response and supports up to 50amp burst and 45amp continuous. With the higher...

Add to cart

Speedy Bee Bluetooth-USB Adapter

SGD$26.00

Speedy Bee Bluetooth-USB Adapter is an unique device that allows you to configure and tune your BetaFlight settings right from your phone via the SpeedyBee app which means no more lugging a laptop to the flying field!  Specifications :  Model Speedy Bee Bluetooth-USB Adapter Output power 0 dBm Receiver sensitivity -94 dBm Transmission rate Bidirectional 2K/s Bluetooth protocol Bluetooth specificiation V4.0...

Add to cart

iFlight SucceX Mini F4 Fly Tower V2

Sold Out

SucceX 2-6S Mini F4 Fly Tower is specially suited for micro racers. One of the first mini stack with 6S LiPo capabilities, it is also for those looking to reduce weight on their mini sized quad. The stack include the SucceX mini F4 flight controller, SucceX 35A 4-in-1 ESC and 48 channels multi power VTx, fit directly on frames with...

Add to cart

Mini 5.8G FPV VTx Whip Antenna - MMCX

SGD$3.10

  Simple lightweight whip antenna, great for short range FPV flying or close proximity flying on mini quads where antenna "catch" is more likely to happen. Also tested indoor and car park flying conditions with good results.  Specifications: Frequency 5.8hz range  Connector MMX Angle / Straight Length 8.2cm (tip to connector tip)  Weight with connector Angle: 1.5g  Straight: 1.5g   

Select Options