• SKU:



Image Sensor 1/3" SONY Super HAD II CCD
Horizontal Resolution 600TVL
Lens 2.1mm ​(M8)​ FOV160°
Signal System PAL / NTSC
Integrated OSD Yes
One Touch Scene Setting(AGC) Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight
S/N Ratio >60dB (AGC OFF)
Electronic Shutter Speed PAL: 1/50~100,000; NTSC: 1/60~100,000
WAuto Gain Control (AGC) Yes
Min. Illumination 0.01Lux@1.2F
Day/Night Color/Auto/B&W
Power DC 5-36V
Working Current 12V@60mA / 5V@120mA
Net weight 6g (M8) 
Dimensions 19mm(L)*19mm(W)*18mm
Notes (difference from Micro Swift 3)

Regular M8 lens (smaller)

Working current 5V@120mA

Camera settings via Joystick control or FC UART control


1x Camera

1x 28.5mm Adapter Bracket for mounting on mini quad frame

1x 6pin FPV silicon wire

1x set of screws


 RunCam Micro Swift 3 V2 – Joystick control & UART control switchable

RunCam Micro Swift 3 V2 – Joystick control

RunCam Micro Swift 3 V2 – UART control

 RunCam Micro Swift 3 V2 – Remote Control

TR Tip : A low ESR capacitor of sufficient rating (eg 1000uf/35Volts for 4S power), across the FC battery pads is helpful against electrical noise that may compromise FPV feed.

If your VTx has an integrated BEC with a stable voltage output of sufficient current capacity consider powering your FPV camera with it, in most cases it will improve the quality of your FPV feed

A LC filter of sufficient current capacity (1 amp is more than sufficient), connected between the camera power source and camera input, is a worthwhile addition for improving feed. If space is a constraint, use a super micro LC filter, usually weighting less than 0.5grams, and hot glue it to the back of the camera.