RGB 10 LED 3535 Multi-Colors Race Wire for 4 in 1 ESCs - 4pcs

SGD$17.70

  iFlight's latest race wire for use with 4in1 ESCs motor connection can now be configured via the FC's firmware configuration, allowing multi-colored LED and scheme. Using race wires with 4in1 ESCs reduces the risk of cutting motor wires from prop strikes. It is also great for mounting underarm for lighting up your quad.  Specifications: Current capacity 40amps No. of...

Add to cart

SucceX F7 TwinG Flight Controller V2.1

Sold Out

SucceX F7 TwinG // GYRO FUSION is the NEXT-GEN flight controller, ready for anything, with 5 uarts, 8 motor outputs, 32Mb blackbox and a powerful F7 processor to run it all. With it's clean intuitive layout, the SucceX F7 TwinG makes installation a breeze with a 4-pin connector for your VTx and an 8-pin connector that allows simple plug and...

Add to cart

Motors screw set (20pcs)

SGD$4.70

  Screw set comprising of 20 pieces, 12.9 high strength YFS screw M3 x 6mm (Gold).   Specifications: Type Button head screws Package includes YFS screw M3 x 6mm (G) suitable for 4mm thickness arm    

Add to cart

T-Motor F60 PRO III - 2500KV/2700KV

SGD$39.00

  Continuing the success of their FPV racing motors, F60 Pro III is the latest from T-motor's stable of FPV racing motors promising higher thrust and durability. These new motors feature high temperature resistance (240 deg Celsius) enameled silver winding and titanium alloy motor shaft with stronger thread, riding on high quality EZO bearings. New great looking bell with anti-slip...

Select Options

SucceX Mini 35A 2-6S 4 in 1 ESC V2

Sold Out

Replacement ESC board for SucceX Mini F4 Stack. Specifications :  Type  V2 MCU STM32F051 Protocol Dshot1200, Proshot, Oneshot, Multishot Target iFlight-BL32-4IN1 Input  2-6S LiPo Current sensor Yes Capacity 35A, 45A burst Dimension 31 x 31mm (including the power pads) Mounting holes 20 x 20mm Package includes 1pc x SucceX Mini 35A 2-6S 4 in 1 ESC    Click here for wiring diagram  

Add to cart

TPU Battery Protector / Landing Gear

SGD$5.70

  Light weight TPU 3D printed designed for racing frames with bottom mounted batteries, it protects the battery from ground hits when in low level flights or when landing.   Specifications : Material 3D printed TPU Colour Yellow, Red Front Incline Angle 30 degrees Fit Type 1 - Red (200 - 250mm frame) Type 2 - Yellow (110 - 130mm frame)...

Select Options

iFlight XING X2306 2450/2750KV FPV NextGen Motor

SGD$29.10

 iFlight XING series motors, designed by FPV pilot and specialist Patrick Xing; combining iFlight's high-quality motor production technology with Patrick Xing's technical expertise to produce a top-of-the-line motor. The elliptical body, powerful stator with high temperature resistant windings, N52H magnets, very small air gap and dynamically balanced bell; result in a motor that delivers incredibly smooth power and thrust. These amazing looking XING...

Select Options

iFlight XING X2207 2450KV/ 2750KV FPV NextGen Motor

SGD$29.10

 iFlight XING series motors, designed by FPV pilot and specialist Patrick Xing; combining iFlight's high-quality motor production technology with Patrick Xing's technical expertise to produce a top-of-the-line motor. The elliptical body, powerful stator with high temperature resistant windings, N52H magnets, very small air gap and dynamically balanced bell; result in a motor that delivers incredibly smooth power and thrust. These amazing looking XING motors...

Select Options

Airbot Furling32 MINI 45A– F3 BLHELI 32 ESC

SGD$27.00

  A powerful ESC in a small package, the Furling32 Mini is the latest ESC from Airbot and employs a full F3 onboard MCU operating at 108Mhz compared to most other Blheli32 ESCs running F0 MCU at 48Mhz. This latest F3 ESC gives a smooth control and fast response and supports up to 50amp burst and 45amp continuous. With the higher...

Add to cart

Speedy Bee Bluetooth-USB Adapter

SGD$26.00

Speedy Bee Bluetooth-USB Adapter is an unique device that allows you to configure and tune your BetaFlight settings right from your phone via the SpeedyBee app which means no more lugging a laptop to the flying field!  Specifications :  Model Speedy Bee Bluetooth-USB Adapter Output power 0 dBm Receiver sensitivity -94 dBm Transmission rate Bidirectional 2K/s Bluetooth protocol Bluetooth specificiation V4.0...

Add to cart

iFlight SucceX Mini F4 Fly Tower V2

Sold Out

SucceX 2-6S Mini F4 Fly Tower is specially suited for micro racers. One of the first mini stack with 6S LiPo capabilities, it is also for those looking to reduce weight on their mini sized quad. The stack include the SucceX mini F4 flight controller, SucceX 35A 4-in-1 ESC and 48 channels multi power VTx, fit directly on frames with...

Add to cart

Mini 5.8G FPV VTx Whip Antenna - MMCX

SGD$3.10

  Simple lightweight whip antenna, great for short range FPV flying or close proximity flying on mini quads where antenna "catch" is more likely to happen. Also tested indoor and car park flying conditions with good results.  Specifications: Frequency 5.8hz range  Connector MMX Angle / Straight Length 8.2cm (tip to connector tip)  Weight with connector Angle: 1.5g  Straight: 1.5g   

Select Options