SALE

Speedy Bee Bluetooth-USB Adapter

SGD$26.00 SGD$19.50

Speedy Bee Bluetooth-USB Adapter is an unique device that allows you to configure and tune your BetaFlight settings right from your phone via the SpeedyBee app which means no more lugging a laptop to the flying field!  Specifications :  Model Speedy Bee Bluetooth-USB Adapter Output power 0 dBm Receiver sensitivity -94 dBm Transmission rate Bidirectional 2K/s Bluetooth protocol Bluetooth specificiation V4.0...

Add to cart

Micro FPV Camera Adapter (KATAK STRETCH - SE & TRP V2)

SGD$2.10

Shed up to 10g by using these adapters to mount a micro FPV camera on your KATAK Stretch SE or the TRP V2 frames. Easy to mount and designed to allow multiple camera height to suit your preference with no additional screws or nuts required. Specifications: Material TPU Colour Orange, Purple, Red Camera angle 80 degrees Weight 1.8g each pair   ...

Select Options

Universal Micro FPV Camera Adapter

SGD$1.55

These adapters enables you to mount of a 19mm wide micro sized camera  on any standard 28mm wide frame, saving as much as 10grams. Use the standard screws that came with your micro camera to mount the adapters to your camera and the included countersunk screw and nut to connect to your frame. Specifications: Material TPU Colour Red Weight 2g...

Add to cart

Micro Cameras Adapter with Protection Cage TPU (KATAK STRETCH - SE & TRP V2)

SGD$3.90

  Designed  specifically for mounting the light weight Runcam Micro series of FPV camera on the Katak Stretch SE and TRP V2 frame. This FPV camera adapter also provides protection against those camera smashing frontal crashes. 3D printed from TPU for increased durability and in attractive colours. Fit both KATAK Stretch SE as well as the TRP V2. Comes in two...

Select Options

FPV Camera TPU Protection Cage V2 (KATAK STRETCH - SE & TRP V2)

SGD$3.90

  New improved, completely re-designed as a 2 pieces component for increased durability and lower replacement cost. This FPV camera cage provides protection against those camera smashing frontal crashes. 3D printed from TPU for increased durability and in attractive colours. Fit both KATAK Stretch SE as well as the TRP V2 and will fit camera’s with Gopro style lens.  Specifications:...

Select Options

SMA/ RP-SMA Adapter for Antenna

SGD$1.65

Specifications: Connector Type 1 & 2 : SMA Male to SMA Female Type 3 : SMA Male to RP-SMA Female Angle Type 1 : 90 degrees Type 2 : 45 degrees Type 3 : 90 degrees Material Brass        

Select Options

SMA/ RP-SMA Adapter- Extension cable

SGD$1.65

Specifications: Connector SMA Male to SMA Female, RP-SMA Male to RP-SMA Female Angle Straight Cable Coaxial  

Select Options

Extension Cable - SMA Female to uFL IPEX

Sold Out

  Specifications: Connector SMA Female to uFL  IPEX  Cable Straight    

Add to cart
SALE

RPSMA Male to SMA Female Extension/ Adapter cable

SGD$4.00 SGD$2.00

  Specifications: Connector RPSMA Male to SMA Female  Cable Straight    

Add to cart
SALE

RGB 10 LED 3535 Multi-Colors Race Wire for 4 in 1 ESCs - 4pcs

SGD$17.70 SGD$10.62

  iFlight's latest race wire for use with 4in1 ESCs motor connection can now be configured via the FC's firmware configuration, allowing multi-colored LED and scheme. Using race wires with 4in1 ESCs reduces the risk of cutting motor wires from prop strikes. It is also great for mounting underarm for lighting up your quad.  Specifications: Current capacity 40amps No. of...

Add to cart
SALE

Super Micro LC Filter for FPV Video (2 packs)

SGD$2.30 SGD$1.73

  Connected between power source (FC, PDB, BEC etc) and FPV components (VTx and FPV camera), LC filters can help to "clean up" dirty DC output jitters that causes lines in wireless video feed. This LC filter uses large value inductor and capacitor components for better filtering.  Specifications: Max current 1A Max input voltage 4S Voltage 16V Size 10mm x...

Add to cart

SANYO Electrolytic Capacitor Low ESR for Power Supply (pack of 2)

SGD$1.14

Available in 2 voltages - 25V and 35V Recommend for use on quads that experience issues caused by electrical “noise” in the system or FCs with sensitive gyros - lines in the FPV feed when increasing throttle, vibrations/oscillations that cannot be tuned out, motor glitches etc. Specifications: Rated voltage 35V (ideal for 4S LiPo, max 5S) 25V (ideal for 3S LiPo,...

Select Options