Total Rotor Flight Controllers Flight Controllers SucceX-D Alpha Whoop F4 20A AIO Board SucceX-D Alpha Whoop F4 20A AIO Board

SucceX-D Alpha Whoop F4 20A AIO Board

Products

Frames

- Frame Kit
- Frame Parts

Accessories

- General Accessories
- Track Accessories
- Props

Electronics

- Batteries
- ESC
- Flight Controllers
- FPV
- Motors
- Tx & Rx

iFlight

Promotion

SALE

SucceX-D Whoop F4 20A AIO Board Total Rotor

Add to wishlist

SKU:

SGD$49.00

Quantity

Original replacement part for iFlight Alpha Whoop

Specifications :

MCU	STM32F411
Gyro	MPU6000
Baro	No
Blackbox	8MB
BEC output	5V 2A / 10V 2A
INA pad	nR2
Constant current	20A, 25A (Burst)
Power input	2-5S (8-25V)
Current Sensor	Yes
BLHeli	BLHeli-S
ESC Telemetry	No
Target	IFLIGHT_F411_PRO
ESC Firmware	G-H-30 BLS
Dimension	30.5 x 30.5mm
Mounting pattern	25.5 x 25.5mm / φ3mm
Connector	Micro-USB

YOU MAY ALSO LOVE

SucceX F7 TwinG Flight Controller V2.1

Sold Out

SucceX F7 TwinG // GYRO FUSION is the NEXT-GEN flight controller, ready for anything, with 5 uarts, 8 motor outputs, 32Mb blackbox and a powerful F7 processor to run it all. With it's clean intuitive layout, the SucceX F7 TwinG makes installation a breeze with a 4-pin connector for your VTx and an 8-pin connector that allows simple plug and...

Add to cart

Add to wishlist

Succex Micro F4 15A V2.1 Stack (plug motor connection )

Sold Out

SucceX 16x16mm micro F4 Tower is specially designed for micro (toothpick) FPV racing frame, compact and and stacked design in a small 16 x16mm form factor with the micro sized FC, ESC, and VTX neatly stack together with soft mount grommets. Highly integrated with all the latest features, optimized internal circuitry and pinned interconnects that makes for an easy straight...

Add to cart

Add to wishlist

iFlight SucceX Mini F4 Fly Tower V2

Sold Out

SucceX 2-6S Mini F4 Fly Tower is specially suited for micro racers. One of the first mini stack with 6S LiPo capabilities, it is also for those looking to reduce weight on their mini sized quad. The stack include the SucceX mini F4 flight controller, SucceX 35A 4-in-1 ESC and 48 channels multi power VTx, fit directly on frames with...

Add to cart

Add to wishlist

SALE

RGB 10 LED 3535 Multi-Colors Race Wire for 4 in 1 ESCs - 4pcs

~~SGD$17.70~~ SGD$10.62

iFlight's latest race wire for use with 4in1 ESCs motor connection can now be configured via the FC's firmware configuration, allowing multi-colored LED and scheme. Using race wires with 4in1 ESCs reduces the risk of cutting motor wires from prop strikes. It is also great for mounting underarm for lighting up your quad. Specifications: Current capacity 40amps No. of...

Add to cart

Add to wishlist

SANYO Electrolytic Capacitor Low ESR for Power Supply (pack of 2)

SGD$1.14

Available in 2 voltages - 25V and 35V Recommend for use on quads that experience issues caused by electrical “noise” in the system or FCs with sensitive gyros - lines in the FPV feed when increasing throttle, vibrations/oscillations that cannot be tuned out, motor glitches etc. Specifications: Rated voltage 35V (ideal for 4S LiPo, max 5S) 25V (ideal for 3S LiPo,...

Select Options

Add to wishlist

SALE

Speedy Bee Bluetooth-USB Adapter

~~SGD$26.00~~ SGD$19.50

Speedy Bee Bluetooth-USB Adapter is an unique device that allows you to configure and tune your BetaFlight settings right from your phone via the SpeedyBee app which means no more lugging a laptop to the flying field! Specifications : Model Speedy Bee Bluetooth-USB Adapter Output power 0 dBm Receiver sensitivity -94 dBm Transmission rate Bidirectional 2K/s Bluetooth protocol Bluetooth specificiation V4.0...

Add to cart

Add to wishlist

Speedy Bee F7 AIO Flight Controller

Sold Out

Speedy Bee F7 AIO is an all new AIO flight controller that integrates PDB, Bluetooth , Barometer, 32MB OnBoard Flash for BlackBox, and users can adjust the parameters of the flight controller using the Speedy Bee App with an integrated Bluetooth chip. The board comes with esc solder pads for use with individual ESCs as well as a connector if building with...

Add to cart

Add to wishlist

SucceX-D F7 TwinG Flight Controller V2.1 (HD Version)

Sold Out

The SucceX-D F7 V2.1 is designed to work seamlessly with DJI’s new HD FPV system, connector to allow direct connection of a DJI Air unit with the included wire harness. In addition, iFlight added the popular and reliable USB Type-C as used in the DJI module. *Features - Universal USB Type C connector instead of micro USB - Plug-and-Play. No need...

Add to cart

Add to wishlist

SucceX-D Alpha Whoop F4 20A AIO Board

Products

YOU MAY ALSO LOVE

Recently Viewed