Speedy Bee F7 AIO is an all new AIO flight controller that integrates PDB, Bluetooth , Barometer, 32MB OnBoard Flash for BlackBox, and users can adjust the parameters of the flight controller using the Speedy Bee App with an integrated Bluetooth chip.

The board comes with esc solder pads for use with individual ESCs as well as a connector if building with 4-in-1 ESCs boards

Click here for manual.

Specifications : 
IMU ICM20689
Baro BMP280 (I2C)
OSD BetaFlight OSD w/ AT7456E chip
BLE module 0nboard for remote setting with SpeedyBee App or other similar apps via Bluetooth connection
Blackbox 32MB onboard dataflash
Current sensor 200A (set scale 102)
BetaFlight Camera Control Pad Yes
Power input 3s - 6s LiPo
Power output

5V *5(Including BZ+), the maximum load current is 2.5A. 

9V * 1, the maximum load current is 2.5A

ESC power output 4 * VCC output

UART Pads*4(UART1, 2, 4,5)

UART 3 : reserved for onboard  Bluetooth module (in "Ports" tab, turn on "Configuation/MSP"  and set baud rate to "19200")

RSSI input RSSI input solder pad

Use Softserial1 to support SmartPort (CLI : " resource SERIAL_TX 11 B00 ")

"SP" solder pad (under the FC next to "RSSI" near battery cable solder tabs")

I2C Used for external Magnetometer, Sonar, etc.
Buzzer BZ+ and BZ- pad used for 5V Buzzer
ESC signal S1 - S5
LED pin Used for WS2812 LED
Boot button Used to easy enter DFU mode
Weight ≈8.8g
Dimension 36.5 x 44 x 7mm
Package includes

Speedy Bee F7 AIO Flight Controller

Speedy Bee BetaFlight Config App

iOS 10.0+:iPhone4S, iPad 3rd Gen and later iOS App Store

Android 4.3+: Google Play


Click here for manual