• SKU:
SGD$53.20

 

Specifications:

Image Sensor 1/3" SONY Super HAD II CCD
Horizontal Resolution 600TVL
Lens 2.1mm IR Blocked
Signal System PAL 
Integrated OSD YES
Integrated MIC YES
S/N Ratio >60dB(AGC OFF)

Electronic Shutter Speed

PAL:1/50~100,000; NTSC:1/60~100,000

AutoGain Control(AGC)

YES
Back light compensation(BLC) YES
Min.illumination 0.01Lux/1.2F
WDR D-WDR
DNR 2DNR
Day/Night Color / Auto / B&W
Power DC 5 to 36V
Working Current 5V@130mA / 12V@70mA
Net weight 14g
Dimensions 28.5mm * 26mm * 26mm
Package

1x Camera

1x Aluminium bracket

1x Set of screws

1x 6pin FPV silicone cable

1x OSD Key-press Board

 

TR Tip : A low ESR capacitor of sufficient rating (eg 1000uf/35Volts for 4S power), across the FC battery pads is helpful against electrical noise that may compromise FPV feed.

If your VTx has an integrated BEC with a stable voltage output of sufficient current capacity consider powering your FPV camera with it, in most cases it will improve the quality of your FPV feed

A LC filter of sufficient current capacity (1 amp is more than sufficient), connected between the camera power source and camera input, is a worthwhile addition for improving feed. If space is a constraint, use a super micro LC filter, usually weighting less than 0.5grams, and hot glue it to the back of the camera.