TPU Battery Protector / Landing Gear

SGD$5.70

  Light weight TPU 3D printed designed for racing frames with bottom mounted batteries, it protects the battery from ground hits when in low level flights or when landing.   Specifications : Material 3D printed TPU Colour Yellow, Red Front Incline Angle 30 degrees Fit Type 1 - Red (200 - 250mm frame) Type 2 - Yellow (110 - 130mm frame)...

Select Options

Backpack buckle (Flight bag Accessory)

SGD$6.80

Made to maximize your existing flight bag, strap your quadcopters on the outside of your backpack and save the internal space for other equipment. Features : Lightweight, stylish carbon fibre plate and TPU brackets. Easy to install, only 3 holes will be needed to mount on your backpack. Package include 1 pc x Buckle Mount Set, 1 pc x 20*200mm straps 1...

Add to cart

RunCam Micro Swift 3 V2 – 2.1mm IR Blocked

SGD$45.80

  Specifications: Image Sensor 1/3" SONY Super HAD II CCD Horizontal Resolution 600TVL Lens 2.1mm ​(M8)​ FOV160° Signal System PAL / NTSC Integrated OSD Yes One Touch Scene Setting(AGC) Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight S/N Ratio >60dB (AGC OFF) Electronic Shutter Speed PAL: 1/50~100,000; NTSC: 1/60~100,000 WAuto Gain Control (AGC) Yes Min. Illumination 0.01Lux@1.2F...

Add to cart

HGLRC DinoShot 60A BlHeli 32 4 in 1 ESC

SGD$99.80

Full size high capacity 4 in 1 esc from HGLRC with high quality MosFets and more than 30 on-board ceramic capacitors for noise reduction. Compatible with most FC but designed to be pair with HGLRC standalone FC the AIRBUS Features: 32bit FO51K86 MCU,48mHz running speed; N-Channel Mosfets 33pieces Low ESR capacitors, total capacity 880uf, lower ripple and more stable voltage;...

Add to cart

iFlight Battery Handbag

SGD$11.00

Flexible combination: Change the space combination, storage 4 DJI Spark batteries / 3 Dji Mavic Pro Batteries/ 2 Dji Phantom3/4 batteries.Safeguard lipo battery: This flame retardant bag is a convenient way of safeguarding your lipo batteries during charging, transit, and storage.Always remember to comply with charging and safety guidelines and never leave charging or damaged Lipo batteries unattended. Features : - Intensive...

Add to cart

T16 Carbon Fiber Cover Replacement

Sold Out

The water transfer printing front panel for Jumper T16/Jumper T16 PLUS/T16 Pro/T16 Pro Hall.  Colour Carbon Fiber  

Add to cart
SALE

FULLSEND 3S 450mAh 75C - XT30

SGD$17.70 SGD$14.16

The FULLSEND 3S 450mAh 75C Lipo Battery is lightweight and very compact size. . The Lipo fits into the iFlight CineBee whoop and TurboBee whoop. This battery increases flight time significantly and it also provides a little more power over the stock battery. Features : * Advanced battery technology doubles your device's performance time* High discharge performance and high energy...

Add to cart
SALE

FULLSEND 4S 450mAh 75C - XT30

Sold Out

The compact and lightweight design of FULLSEND 4S 450mAh 75C Lipo Batteries  makes it ideal for H frames and 4S whoop drones. Features: * Advanced battery technology doubles your craft's performance time* High discharge performance*Lithium Polymer raw materials from Japan and Korea * Reliable power for FPV micro H-frame quads and whoop quads   Specifications: Minimum Capacity 450mAh Discharge Rate 75C Configuration...

Add to cart
SALE

Jumper T18 Pro Carbon Faceplate (ALPS RDC90 Gimbals)

SGD$265.50 SGD$238.95

The Jumper T18 Pro version comes with the super smooth ALPS RDC90 sensor gimbals offering higher precision than Hall sensors. The Jumper T18, operating on OpenTX, brings the best features of the T16 series along with an upgrade of the JP4-in-1 module into JP5-in-1 for more compatibility  The Jumper T18 has a JP5-in-1 multi-protocol module with 2.4G JP4-in-1 and 915MHZ / 868MHZ at...

Add to cart

T-Motor T5143S 3-blade Propeller

SGD$5.20

T5143S T-Motor Ultralight series prop, a lightweight and responsive tri-blade propeller. With its lightweight design, the prop comes in at only 4.1g. This low weight decreases spool up times, which increases feel and responsiveness. Absolutely perfect for lightweight builds or builds with higher KV motors that can take advantage of the lightweight design. The standout feature of this propeller is that...

Select Options
SALE

Bonka U2 SI GR 1500mAh 4s 95c Silicone Graphene Lipo Pack

SGD$44.20 SGD$39.75

*Not available for overseas shipment A new upgraded version of BONKA FPV performance U2 batteries series, employing the latest Silicone Graphene (SI GR) composition for added consistent explosive power - Ultralight - Higher reliability - Remarkable performance Specifications: Cells   4S  Capacity  1500mAh Discharge 95C (142.5amp) Burst Discharge 190C (285amp) Nominal Voltage  14.8V Cell Configuration 4S1P Connection  XT60 plug Dimension W37mm x H34mm x L76mm Weight 196g   * For those in the...

Select Options
SALE

Infinity RS Force V3 1550mAh 4s Square LiPo (120 - 240C)

SGD$47.30 SGD$37.84

Special price for package orders! Click drop down box for pricing!  *Not available for overseas shipment Infinity Force with graphene tech, version 3 of the successful RS Force racing batteries; featuring a higher discharge platform than version 2 as well as lower sag and higher reliability compared to other similar products. Square form factor will fit most frames and reduces the risk of damage...

Select Options