RunCam Nano 2 1/3" 700TVL 1.8mm FOV 155/170 Degree CMOS FPV Camera for FPV RC Drone


Model RunCam Nano 2
Image Sensor 1/3 CMOS
Horizontal Resolution 700TVL
Lens 1.8mm (M8) FOV 170°
Signal System PAL/NTSC Non Switchable
S/N Ratio >50dB
Electronic Shutter Speed Auto
Auto Gain Control (AGC) Auto
Min. Illumination 0.01Lux@1.2F
D-WDR Auto
Day/Night Color
Power DC 3-5.5V
Current 120mA@3.3V
Housing Material ABS
Net Weight 3.2g
Dimensions L14mm*W14mm*H16mm

1x Camera

1x 1419 ABS Bracket

1x set of screws



TR Tip : A low ESR capacitor of sufficient rating (eg 1000uf/35Volts for 4S power), across the FC battery pads is helpful against electrical noise that may compromise FPV feed.

If your VTx has an integrated BEC with a stable voltage output of sufficient current capacity consider powering your FPV camera with it, in most cases it will improve the quality of your FPV feed

A LC filter of sufficient current capacity (1 amp is more than sufficient), connected between the camera power source and camera input, is a worthwhile addition for improving feed. If space is a constraint, use a super micro LC filter, usually weighting less than 0.5grams, and hot glue it to the back of the camera.