• SKU:

Sold Out

 

The RunCam Eagle 2 is a premium high-performance FPV camera that uses a 1/1.8" 4:3 CMOS Sensor with 800TVL resolution, low latency and excellent low light performance. 

The improved Global Wide Dynamic Range (WDR) allows for better lighting transitions than most other traditional CMOS Sensors. The wider power input (5 to 36 volts), together with its compact dimensions allows the camera to be used with more devices. 

The strong aluminum alloy case allows the user to easily mount the camera on to most multi-rotor frames. 

Specifications :

Image Sensor : 1/1.8" CMOS Sensor
Horizontal Resolution 800VTL
Lens Size 2.5mm
FOV 140°
Signal System NTSC/PAL switchable on OSD menu
Synchronization Internal
OSD Set Yes
S/N Ratio >50dB
Electronic Shutter Speed Auto
Min. Illumination 0.0001Lux/F1.2
WDR Global WDR
Day/Night Auto/external/color/B&W
Video Output CVBS
Power Input 5 to 36 volts
Housing Material alluminium alloy
Dimensions 28mm x 26mm x 28mm
Net Weight 18g
Package

1 x Camera (Red / Orange casing)

1 x Replaceable rear case

1 x Aluminum bracket 

1 x Screw set

1 x 5D-OSD menu cable

1 x 3 pin FPV silicone cable

1 x 2 pin extension cord for menu cable

 

TR Tip : A low ESR capacitor of sufficient rating (eg 1000uf/35Volts for 4S power), across the FC battery pads is helpful against electrical noise that may compromise FPV feed.

If your VTx has an integrated BEC with a stable voltage output of sufficient current capacity consider powering your FPV camera with it, in most cases it will improve the quality of your FPV feed

A LC filter of sufficient current capacity (1 amp is more than sufficient), connected between the camera power source and camera input, is a worthwhile addition for improving feed. If space is a constraint, use a super micro LC filter, usually weighting less than 0.5grams, and hot glue it to the back of the camera.